RDL-3000
3.2.3
Setting Wireless Rates
The wireless bandwidth is shared between all subscribers in a sector. Use the following
settings to control traffic rates over the wireless interface.
Type
Link
Service
Service
Group
Notes:
1. Unicast traffic with an unknown destination (all RDL-3000 units maintain a forwarding
table) is transmitted two modulation steps below the lowest rate currently in-use
across all active Services.
User Manual
Table 4: Web - Operation - Wireless Rates
Function
Set the Uncoded Burst Rates (UBR) for
uplink and downlink traffic to/from this
subscriber. This rate is shared across all
Services and Service Groups.
Set the uplink and downlink rates (per
Service) for unicast traffic to/from this
subscriber.
Set the downlink rates (per Service
Group) for multicast and broadcast
traffic sent to members of this group.
Fig. 13: PMP - Wireless Rates
Wireless Settings
Downlink UBR
Uplink UBR
Adaptive modulation mode
Downlink CIR / PIR
Uplink CIR / PIR
Downlink Burst rate
Downlink CIR / PIR