Module Installation And Service; Installation Into A Final Product; Module Servicing; Professional Installation - Redline RDL-3000 Series Product Manual

Broadband wireless systems; radio modules
Hide thumbs Also See for RDL-3000 Series:
Table of Contents

Advertisement

RDL-3000 RMC/E/F MODULE
3

Module Installation and Service

3.1 Installation Into a Final Product

The RDL-3000-RMC/E/F modules must be installed only by trained professional
technicians authorized by Redline or its agents. The module must be installed only into
an approved enclosure (see Conditions of Use) and only at an approved manufacturing
facility or service depot.

3.2 Module Servicing

The RDL-3000-RMC/E/F modules are not intended to be field serviceable, and contains
no field serviceable or field replaceable parts. The module must be serviced only at an
approved manufacturing facility or service depot.
Warning:
electrostatic charge. Electrostatic Discharge (ESD) must be avoided to prevent
damaging or destroying the module. The module must always be store in an anti-static
container/bag prior to installation and following removal from the product for servicing.
Observe ESD precautions when handling the module.

3.3 Professional Installation

Devices containing the Redline RDL-3000-RMC/E/F module require professional
installation. It is the responsibility of the installer to understand the product operation
by attending training as required, reading and understanding the product
documentation, and ensuring that all building, safety and regulatory codes are met
and the installation is complete and secure.

3.4 Safety Precautions

Installation and service of RDL-3000-RMC/E/F modules must be performed by
personnel having technical training and experience necessary to be aware of hazards
during installation and/or service of RF equipment. The installation and/or service must
be done using procedures designed to minimize any danger to technical personnel or
any other person.

3.5 Radio Frequency Safety

The installer of this radio equipment must ensure that the antenna is located or pointed
such that it does not emit RF fields in excess of the general population limits as defined
by FCC CFR 47, Part 2.1091, Radio frequency radiation exposure evaluation for fixed
devices & Health Canada limits for the general population; consult Safety Code 6,
obtainable from Health Canada's website:
http://www.hc-sc.gc.ca/ewh-semt/pubs/radiation/radio_guide-lignes_direct-eng.php
Refer to the regulator statements included in this document.
70-00184-03-02
The RDL-3000-RMC/E/F modules are susceptible to damage from
Proprietary Redline Communications © 2013
PRODUCT MANUAL
Page
.
8
of 50
April 30, 2013

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rdl-3000-rmcRdl-3000-rmeRdl-3000-rmf

Table of Contents