RDL-3000
4
Web Interface
4.1
Network Connection to RDL-3000
The RDL-3000 can be configured and monitored using a PC equipped with a standard
Ethernet port and a Web browser (Internet Explorer 6.0 or higher) or Telnet client. Refer
to the following diagram for basic connections.
Notes:
This diagram does not illustrate the surge protection required for outdoors installation
1.
of the RDL-3000 equipment. The system must be properly grounded to protect
against power surges and accumulated static electricity. Refer to the RDL-3000
Installation Guidelines manual.
When configuring the RDL-3000 in sector controller mode (PMP SC), the RF ports
2.
must be properly terminated to an RF load device, or the radio must be disabled
(Radio Enable = off).
User Manual
Fig. 23: Web - Connecting a PC to the RDL-3000
Chapter 4