Pmp Configurations; Vlan Services; Fig. 17: Pmp - Operation - Vlan Services - Default Groups And Services - Redline RDL-3000 User Manual

RDL-3000
3.2.7

PMP Configurations

This section describes basic configurations for an RDL-3000 PMP system.

VLAN Services

Default Groups and Services
In this example, all voice traffic is separated from data traffic, allowing specific CIR and
PIR value to be set for this traffic. All traffic not classified to the Voice Service Group is
processed by the Data Group (Pass through mode).
The Voice Group and member Services are configured for tagged traffic. The VLAN tag
(VID= 3) is removed from packets received from the wired network and restored when
the packet is forwarded on the remote wired network (both directions). The Data Group
and Services are configured for Pass-through mode and packets are forwarded
unmodified to the destination port.

Fig. 17: PMP - Operation - VLAN Services - Default Groups and Services

Notes:
This configuration does not enforce a S ervice Group to have a S ervice on every
1.
subscriber.
The sector controller Ethernet port may be disable to support a private network.
2.
User Manual