Snmpcommunity - Redline RDL-3000 User Manual

RDL-3000
idtable
Display information for all system IDs.
192.168.25.2(show)# idtable
------------------------------------------------------
links
Display information for all Links.
192.168.25.2(show)# links
log
Display the system events log.
service
Show the list of enabled service connections.
192.168.25.2(show)# service 17
snmp
Display the SNMP configuration.
stats
Display available statistics.
5.3.20

snmpcommunity

Use the snmpcommunity command to configure SNMP community permissions.
snmpcommunity <add> <clearall> <default> <del> <print>
add <name> <rights>
Add a new SNMP community to the SNMP community table. The index value is assigned
automatically. Up to eight community entries can be entered.
name
Enter the SNMP community name.
rights
Specify the rights for this community string. Where.
clearall (no parameters)
Delete all SNMP parameters.
default <idx>
Set all SNMP parameters to factory default settings.
idx
User Manual
ID Name
4 Sub A
5 Sub B
10 Sub C
15 Sub D
128 Voice
129 Data
160 Data A
161 Voice A
162 Data B
163 Voice B
164 Data C
165 Voice C
4 Sub A
5 Sub B
10 Sub C
15 Sub D
174 service1
0: Deny read and write permission (enter zero).
r: Grant read access permission only.
w: Grant write access permission only.
rw: Grant read and write access permission.
Specify single entry to be set to default (use 'print' command to display ids).
Type Status
Link Enabled
Link Enabled
Link Enabled
Link Enabled
Group Enabled
Group Enabled
Conn Enabled
Conn Enabled
Conn Enabled
Conn Enabled
Conn Enabled
Conn Enabled
Link Down
Link Down
Link Down
Link Down
Conn