Snmptrap; Upgrade - Redline RDL-3000 User Manual

RDL-3000
del <idx>
Delete the specified community entry.
idx
print
List all SNMP communities and associated permissions.
5.3.21

snmptrap

Use the snmptrap command to configure the SNMP trap message reporting.
snmptrap <off | on> <add> <change> <clearall> <del> <print>
add <ipaddr> <port> <identity>
Create a new SNMP trap. The index value is assigned automatically. Up to eight settings
may be entered.
ipaddr
port
identity
change <idx> [-p <port>] [-i <ip_add>] [-c <community>] [-u username]
Modify the specified SNMP setting.
idx
-i <ip_add>]
-p <port>]
-c <community> Enter associated SNMP community string (SNMP V1 or V2).
-u <username>
clearall
Delete all SNMP parameters.
del <idx>
Delete the specified SNMP trap.
idx
linkupdown
Trap indicates when the wireless
Off - Enable link up/down trap.
On - Disable link up/down trap.
off
Disable all SNMP traps.
on
Enable all SNMP traps.
print
List all SNMP trap settings.
5.3.22

upgrade

Use the upgrade command to upload a new firmware binary file to the RDL-3000.
upgrade <ip addr> <file name> <user name> <password>
ip addr
IP address of the FTP/TFTP server.
file name
User Manual
Specify single entry to be deleted (use 'print' command to display ids).
Enter destination IP address
Enter destination port address.
v2: Enter associated SNMP community string.
v3: Enter account username for authorization.
Index of the SNMP trap (use 'print' command to display ids).
Enter destination IP address.
Enter destination port address.
Enter account username for authorization (SNMP V3 only).
Index of the SNMP trap to be deleted (use 'print' command to display ids).
Link
is lost and recovered.