Poe Power Adapter; Fig. 7: Features - Indoor Power-Over-Ethernet (Poe) Module - Ac Model - Redline RDL-3000 User Manual

RDL-3000
2.10

PoE Power Adapter

The PoE power adapter (Standard IEEE 802.3at PoE, 25 W max.) supplies operational
power (48 VDC) to the RDL 3000. Power is injected using four reserved wires in the
Ethernet cable. The RJ-45 / F connectors allow for easy mid-span installation without
opening the Ethernet cables. The power adapter AC input is auto-sensing 110/220/240
VAC 50/60 Hz. Cables are available with NA, EU, or UK plugs.

Fig. 7: Features - Indoor Power-over-Ethernet (PoE) Module - AC Model

Note: The PoE does not amplify the Ethernet signal. The maximum total length of the
Ethernet cable is 91.5 m (300 ft). For example, 90 m (295 ft) from the RDL-3000 to the
PoE and 1.5 m (5 ft) from the PoE to the local network equipment.
Customer equipment including personal computers, routers, etc., must be connected
only to the INPUT (DATA) port on the PoE unit. Only the outdoors Ethernet interface
cable connecting to the RDL-3000 can be safely connected to the OUTPUT (DATA &
POWER) connector. Connecting customer premises Ethernet equipment directly to
the OUTPUT (DATA & POWER) connector on the Power-over-Ethernet power
adapter may damage customer equipment.
User Manual
Warning to Service Personnel: 48 VDC