Show - Redline RDL-3000 User Manual

RDL-3000
telnetport <1 - 65535>
Telnet port address
ulcir <id> <50-50000>
Enter the uplink committed information rate for the service (Kbps).
ulminrate <id> <6 - 54>
ulpir <id> <50 - 50000>
ulrate <id> <1-54>
usrauthmode <local> <radius>
x509auth <off | on>
Enable or disable authentication.
5.3.19

show

Use the show command to display system statistics.
show <config> <conns> <groups> <files> <idtable> <links> <log> <snmp> <service>
<stats>
config
Display system configuration information.
conns <id>
Display information for a
192.168.25.2(show)# conns 4
files <run | usr>
Display the key and certificate files.
groups
Display information for all Service Groups.
192.168.25.2(show)# groups
User Manual
port - Limits for the telnet port are 22..79 and 81..65534 (default is 23).
Changes to this field are effective only following reboot.
id - [id number]
Link minimum downlink uncoded burst rate.
id - Link ID number.
Service uplink peak information rate (PIR) (Kbps).
id - Service ID number.
Link maximum uplink uncoded burst rate.
id - Link ID number.
Set the user authentication mode. Specify local services, the RADIUS server, or
both in combination.
local - use local authentication.
radius - Use the RADIUS server.
off - Allow network registrations without authentication.
on - Require authentication using X.509 certificates.
Service
. Default is to display all
Service
id ID of .
196 Data A
197 Voice A
run - Display keys currently in use.
usr - Display the user keys and certificates (default).
128 Voice
129 Data Group
Services
Conn
Conn
Group
.