Vlan Tagged Management; Fig. 16: Pmp - Vlan Tagged Management - Redline RDL-3000 User Manual

RDL-3000
3.2.6

VLAN Tagged Management

When the Management VLAN Tagging feature is enabled, the RDL-3000 recognizes
only management commands received in VLAN packets with the specified VID.
Remote Management
Use of remote management (over the wireless interface) requires creating a Service
Group and adding a Service for each managed subscriber. The CIR and priority settings
must provide sufficient bandwidth and priority to perform administrative tasks.
Local Management
A Service Group and Services are not required for local access to the RDL-3000 using
the Ethernet port. Ingress packets received on the Ethernet port are checked for a VLAN
tag with the management VID before performing classification, and matching packets
are forwarded directly to the management application.
Notes:
For initial installation and setup, it is recommended to use 'Pass through' mode for
1.
the management Service Group and member Services. Connectivity issues with
VLAN services may cause the RDL-3000 management function to be unreachable
and require a site visit and/or long reset operation to recover control of the unit.
The remote unit can be managed over the air only via the sector controller
2.
(SC)Ethernet port (security restriction).
User Manual

Fig. 16: PMP - VLAN Tagged Management