Command Set; Apply; Arp; Chgver - Redline RDL-3000 User Manual

RDL-3000
5.3

Command Set

5.3.1

apply

Use the apply command to activate changes to the configuration without overwriting the
last saved configuration. This is equivalent to clicking the Apply button in the
configuration screens.
apply <config>
config
Activate all changes to the configuration, but do not save changes permanently in the non
volatile RAM.
Note: Use this command in combination with reboot to temporarily test changes to the
configuration. For example:
5.3.2

arp

Use the arp command to manually (e.g., for wireless link aggregation). A maximum of
two static (persistent) entries can be added to the table. Use the 'save config' command
to permanently save changes to the static entries in the ARP table. Static entries loaded
at boot time are recorded in the RDL-3000 system log.
arp <add> <del> <print>
add <Host> <MAC>
Add a new static entry in the RDL-3000 ARP table. Use 'save config' to save these entries
permanently. A maximum of two static entries can be added to the table.
Host
MAC
del <Host>
Delete a static or dynamic entry from the ARP table. Also see command 'clear arptable'.
Host:
print
Print the ARP table. The * indicates manually entered values.
For example:
192.168.25.12# arp print
Persistent MACs:
5.3.3

chgver

Use the chgver command to change the firmware version loaded when the RDL-3000 is
rebooted.
chgver (no options)
Switch to the binary saved in the alternate version of firmware. This command works silently (no
operator confirmation) and the RDL-3000 reboots immediately.
Note: Use 'get swver' to list the active and alternate versions of firmware.
5.3.4

clear

Use the clear command to delete all entries in a table.
clear <arptable> <freqlist> <idtable> <log>
arptable
Delete all static entries in the ARP table (refer to arp).
freqlist
Delete all frequency ranges from list (refer to 'freq' command).
User Manual
Host IP address. Must be same subnet as RDL-3000 unit.
Host MAC address (e.g., 01-02-03-04-05-06)
Host IP address of ARP entry to be deleted
192.168.25.1 at 00:05:5d:e0:5b:10
192.168.25.22 at 11:22:33:44:55:66 *
192.168.25.22 at 11:22:33:44:55:66
192.168.25.33 at 01:02:03:04:05:06