Subscriber Links Summary (Sector Controller Only); Fig. 30: Web - Subscriber Links Summary Screen - Redline RDL-3000 User Manual

RDL-3000
4.4.3

Subscriber Links Summary (Sector Controller Only)

Click Links Summary
screen is available only on subscriber units.
Name: Operator-assigned name for wireless Links and related Services. Click an entry
in the Name field (e.g., link-171) to display the
ID/Status: Subscriber Link identifier and status indicator.
ID: A unique identifier (4 to 127) assigned to each subscriber Link. This value is
required when using the CLI interface to modify settings.
Status: Status of this link or Service.
The Link/Service is available.
The Link/Service is unavailable (offline or disabled).
Click the status icon (e.g.,
SINADR [dB]: Ratio of the average RF signal strength to interference, noise, and distortion.
DL: SINADR reported by the remote end unit.
UL: Received signal strength to noise measured by this unit.
RSSI [dBm]: Received signal strength indicator.
DL: RSSI reported by the remote end unit.
UL: Received signal strength measured by this unit.
Burst Rate [Mb/s]: The current uplink and downlink uncoded burst rate for the link.
DL: Current downlink burst rate.
UL: Current uplink burst rate.
Total Wireless Packets: Total packets successfully processed over the wireless interface.
Total does not include discarded or errored packets.
DL: Total packets transmitted over the wireless interface.
UL: Total packets received over the wireless interface.
Retransmitted Wireless Packets: Total number of wireless packets that have been
retransmitted over the wireless interface.
DL: Total packets retransmitted over the wireless interface.
UL: Total packets retransmitted by the remote end.
User Manual
in the main menu (SC) to view the status of all wireless links. This

Fig. 30: Web - Subscriber Links Summary Screen

) to display the
Link Configuration screen for that item.
Subscriber Link Status screen.