Del; Enable; Freq - Redline RDL-3000 User Manual

RDL-3000
idtable
Delete all IDs from the idtable.
log
Delete all messages from the log.
5.3.5

del

Use the del command to delete a specific ID or security key/certificate.
del <file> <folder> <id>
file <name> <mode>
Remove a file from runtime memory and non volatile RAM.
name <filename>
File name must be of the following format:
dsa_key_<mac>.pem
rsa_key_<mac>.pem
ssl_cert_<mac>.pem
ssl_key_<mac>.pem
usr_wcert_<mac>.der* User wireless certificate.
usr_wkey_<mac>.der*
usr_wacert_<mac>.der* User wireless authority certificate.
The <mac> portion is the MAC address of the board. For example: dsa_key_00-09-
02-00-01-02.pem
mode <usr | factory | fips>
Specify the type of information to display.
usr
factory
fips FIPS mode files.
id <id>
Remove a
id
folder <usr | factory | fips>
Remove all files from the specified table.
usr - User entered files (default).
factory - Factory use only.
fip - FIPS mode files.
5.3.6

enable

Use the enable command to enable a specific ID (Service Group, Service, or Link).
enable <id>
Enable a specific ID.
id Unique number for Service Group, Service, or Link.
5.3.7

freq

Use the freq command to configure frequency ranges when using autoscan or DFS.
freq <add> <clearall> <del> <print> <reload>
add <begin> <end>
Add a frequency range (up to 32 ranges).
begin - start frequency (MHz)
User Manual
DSA key used for SSH.
RSA Key used for SSH.
SSL Certificate.
SSL Key.
User wireless key.
User entered files (default if type is not specified).
Factory default files (requires hardware jumper selection).
Service Group Service
,
Service Group
Unique number for
Link
, or table entry.
Service
, , or
Link
.