Wireless; Wireless Packets - Redline RDL-3000 User Manual

RDL-3000
Status Code: Coded indicator for status of this unit. Refer to section 6: Diagnostics &
Troubleshooting on page 114. A code of '0x000' indicates normal operation.
Active Subscriber Services: The number of Services active on this link.
Data Link Condition: Indicate the status link:
Off: Wireless link is not active (e.g., subscriber is not registered).
On: Wireless link is active.

Wireless

The following statistics are displayed for the downlink and uplink.
Burst Rate [Mb/s]: The current uplink and downlink uncoded burst rate for the link.
Downlink: Current downlink burst rate.
Uplink: Current uplink burst rate.
RSSI [dBm]: Received signal strength indicator.
Downlink: Downlink RSSI (reported by the remote end unit).
Uplink: Uplink received signal strength (measured by this unit).
SINADR [dB]: Ratio of the average RF signal strength to interference, noise, and distortion.
Downlink: Downlink SINADR (reported by the remote end unit).
Uplink: Uplink received signal strength to noise (measured by this unit).
Lost Frames: Number of frames lost.
PIR:
Operator-assigned
Downlink:
Uplink:

Wireless Packets

Summary of wireless packet activity on the downlink and uplink.
Total: Total number of packets processed over the wireless interface. Total does not include
discarded and errored packets.
Retransmitted: Total number of wireless packets retransmitted over the wireless interface.
Lost: Total number of wireless packets discarded by this unit due to errors.
Controls
Refresh: Click to update displayed statistics counters.
Reset: Click to reset displayed statistics counters.
User Manual
Peak Information Rate (PIR) for this link.
Operator-assigned downlink Peak Information Rate (PIR) for this link.
Operator-assigned uplink Peak Information Rate (PIR) for this link
.