Generate; Get - Redline RDL-3000 User Manual

RDL-3000
end - end frequency (MHz)
clearall
Delete all entries from the frequency list.
del <idx>
Delete a frequency validation range
idx - Frequency validation range index. Use 'print' to display IDs.
print
Print the list of frequency ranges.
Local frequency ranges:
index
-------------------------------
0
1
reload
Reload the active list of frequency validation ranges.
5.3.8

generate

Use the generate command to generate a D SA key for use with SSH. The generated
key is saved in runtime memory and non volatile RAM. A system reboot is required to
activate the new key.
generate <sshkey>
The RDL-3000 generates a key using its internal encryption module.
sshkey <dsa | rsa>
dsa
rsa
5.3.9

get

Use the get command to view system parameters. Use the following general format to
view a parameter.
get <parameter>
activeids
Number of active IDs (Services, Service Groups, and Links).
activelinks
Number of active Links.
dldpkt
Number of downlink discarded packets.
dloir <id>
Get the downlink offered information rate for the service.
dlrpkt
Number of downlink Rx packets.
dltpkt
Downlink Tx packets.
erxpkt
Number of Ethernet packets received.
erxpktd
Number of Ethernet packets received that were discarded.
ethsts
Speed and duplex settings for the Ethernet port.
User Manual
begin end
5810.0 5820.0
5830.0 5835.0
Generate DSA key for SSH.
Generate RSA key for SSH.