Radius Setup; Table 7: Web - Required Freeradius Files; Fig. 37: Web - Radius Configuration Screen - Redline RDL-3000 User Manual

RDL-3000
4.5.2

RADIUS Setup

When Radius or Local + RADIUS is checked
in the main menu to display the RADIUS Configuration screen. Click
to hide fields.
The following fields are provided for configuring the RADIUS server:
Server Enable: Control the RADIUS server mode.
Disabled ( ):.Do not use the RADIUS server for user authentication. This unit will
use only local user authentication
Enabled ( ): Use the RADIUS server for user authentication.
Server IP Address: RADIUS server IP address.
Server Auth-port: Listening port address on RADIUS server (default port is 1812).
Shared secret: Password for RADIUS server. The password must conform to the
security policy (refer to section 4.7.2: Users Management on page 85).
Request retries: Maximum number for attempts to contact the RADIUS server.
Request time-out: Time to wait for response from the RADIUS server (seconds).
Note:
When using FreeRadius server, the following files on the server platform must be
1.
modified. See the RADIUS documentation for additional operating details.
Define a client.
Add admin account
Add user account
Reject an account.
User Manual

Fig. 37: Web - RADIUS Configuration Screen

(Utilities->User

Table 7: Web - Required FreeRadius Files

clients.conf client 192.168.0.0/16 {secret = secret shortname =
users.conf admuser
users.conf usrjoe:
users.conf lameuser:
Reply-Message = "Account has been disabled."
, click Configuration->System->RADIUS
Management).
RDL3000 }
Auth-Type := Local, User-Password == "abc"
Service-Type = Administrative-User
Auth-Type := Local, User-Password == "pass"
Service-Type = NAS-Prompt-User
Auth-Type := Reject
to expand or