Hiding Speed Slider
Located at the base of the Run tab screen, the Speed Slider allows the operator to change the speed
of a running Program.
1. In the Header, tap the Hamburger menu icon and select Settings.
2. Under Preferences, tap Run Screen.
3. Select check box to show or hide Speed Slider.
21.3.2 Password
Mode
The operational mode password prevents unauthorized modification of robot setup, by creating two
different user roles on PolyScope: Automatic and Maual. When you set operational mode password,
programs or installations can only be created and loaded in manual mode. Any time you enter
manual mode, PolyScope prompts for the password that was previously set on this screen.
Safety
The Safety password prevents unauthorized modification of the Safety settings.
21.4 System
21.4.1 Update
Install updates from a USB to ensure the robot software is up-to-date.
Updating Software
1. In the Header, tap the Hamburger menu icon and select Settings.
2. Under System, tap Update.
3. Insert an USB and tap Search to list valid update files.
4. In the list of valid update files, select desired version and tap Update to install.
21.4.2 Network
You can configure robot connection to a network by selecting one of three available network meth-
ods:
• DHCP
• Static Address
• Disabled network (if you don't wish to connect your robot to a network)
e-Series
WARNING:
Always check your program/s after a software upgrade. The upgrade
might change the trajectories in your program.
II-132
21.4 System
Version 5.4