Table of Contents
Advertisement
Updating the Firmware
Firmware for all the touchpanels can be upgraded using Toolbelt or the touchpanel web page.
Before starting, consult your IT team and ensure that the touchpanel has a unique IP address.
Downloading Firmware
1.
2.
3.
4.
5.
6.
7.
8.
Updating Firmware Using the Touchpanel Web Page
1.
2.
3.
4.
Updating Firmware Using Toolbelt
For complete information about using Toolbelt to update the touchpanel firmware, see the
Toolbelt Help File.
Power on a computer that is connected to the same network as the touchpanel.
On the Extron website, click
figure 19,
).
1
2 2
Figure 19.
Firmware Download Center
Click
in the menu bar in the left side bar (
Firmware
Click the letter
from the list of letters (
T
Scroll down the page until you find the firmware for your model.
Click
for more information about the firmware.
Release Notes
Click
.
Download
Enter the required information and press the download button. An executable (.exe) file is
downloaded to your computer. Run this program to place the firmware on your computer for
future use. Make a note of the folder where the firmware is saved.
If you have not already done so, download the firmware file to a computer on the same
network as the touchpanel (see the previous section).
Open the touchpanel web page (see the previous page).
Figure 20.
Touchpanel Web Page: Firmware Uploader
Click
and navigate to the firmware location. Select the firmware file and click
Browse
Click
Upload
. The firmware file is uploaded to the touchpanel. Follow the on-screen
instructions.
TLP Pro 1220, TLP Pro 1520, and TLP Pro 1720 Series • Configuration Software
in the menu bar along the top of the page (see
Download
1 1
3 3
2
).
3
).
.
Open
23
Advertisement
Table of Contents
