Updating The Firmware; Downloading Firmware; Updating Firmware Using The Touchpanel Web Page; Updating Firmware Using Toolbelt - Extron electronics TLP Pro 1022M User Manual

Updating the Firmware

Firmware for the TLP Pro 1022 series can be upgraded using Toolbelt or the touchpanel web
page. Before starting, consult your IT team and ensure that the touchpanel has a unique IP
address.

Downloading Firmware

1.
2.
3.
4.
5.
6.
7.
8.

Updating Firmware Using the Touchpanel Web Page

1.
2.
3.
4.

Updating Firmware Using Toolbelt

For complete information about using Toolbelt, see the Toolbelt Help File.
Power on a computer that is connected to the same network as the touchpanel.
On the Extron website, click
figure 17, 1 ).
2 2
Figure 17. Firmware Download Center
Click in the menu bar in the left side bar (
Firmware
Click the letter from the alphabet menu (
T
Scroll down the page until you find the firmware for your model.
Click for more information about the firmware.
Release Notes
Click .
Download
Follow the onscreen instructions to download the program. Make a note of where the
firmware is stored on the PC.
If you have not already done so, download the firmware file to a computer on the same
network as the touchpanel (see the previous section).
Open the TLP Pro 1022 Series Web Pages
Figure 18. Touchpanel Web Page: Firmware Uploader
Click and navigate to the firmware location.
Browse
Click . The firmware file is uploaded to the touchpanel. Follow the on-screen
Upload
instructions.
in the menu bar along the top of the page (see
Download
1 1
3 3
2 ).
3 ).
(see the previous page).
TLP Pro 1022 Series • Configuration Software 17