Install The Aml Cabling - Nortel Meridian Mail Installation Quick Reference Manual

Installing the Meridian Mail to Meridian 1 interface

Install the AML cabling

Install the AML cabling
Choose either direct or indirect cabling between the Meridian 1 and Meridian
Mail.
Direct routing
AML cabling
QPC513
(ESDI)
or
NT6D80AA
(MSDL)
Meridian 1
AML
(ISDN/AP)
Meridian Mail
prime node module
Note: To minimize EMI, cables should stay within the module. Therefore, avoid the
use of alternative, indirect routing through the I/O panel wherever possible.
Indirect routing
Standard 1.0
Step Action
1 If there is a cable from J3 on the Meridian Mail backplane to the
right I/O panel, CSL port, remove it.
2 Connect the AML cable as shown in the following illustration.
I/O panel
(d)
(e)
(a)
Right I/O
panel
J3
(b)
Step Action
1 Connect the cables as shown in the preceding illustration.
Modular Option EC Installation Quick Reference Guide
Cables
Direct routing
(a) AML NTND91AA/AB
or NTND27AA/AB (shielded)
Indirect routing (alternative)
(c)
(b) AML to I/O (NT6D4410)
(c) AML (NTND91AA/AB)
(indirect routing)
(d) I/O to QPC513 (P0695822)
(e) I/O to MSDL
(NTND27AA/AB)
7-13
G100061
November 1999