Nortel Meridian Mail Installation Quick Reference Manual page 150

9-8
Prompts Responses
LTHR YES
USER CMS
ADAN <cr>
VAS NEW or CHG
VSID xx
DLOP <cr>
CMS xx
CONF DIR
CMS <cr>
CSQI nn
CSQO nn
CR
Overlay 17—AML link configuration (Release 18 or later)
Prompts Responses
REQ CHG
TYPE CFN
ADAN NEW AML#
CTYP MSDL or ESDI
DNUM 0–15
PORT x
DES aaa...a
Standard 1.0
Description
Modify link performance thresholds. Use defaults for all
prompts except USER
This ESDI port is used for AML.
Go on to next prompt.
Define AML link configuration.
Server ID. Should be the same number as the AML link
number.
Go on to next prompt.
Must be the same as the ESDI device number (DNUM)
Link configuration is DIR.
Go on to next prompt.
Maximum number of call registers for input queues–
twice the number of voice ports
Maximum number of call registers for output queues–
twice the number of voice ports
Press carriage return to the end of the overlay.
Description
Change
Configuration data block
# is the AML (link) number in the range 0–15. Should
match the card address switch (DNUM).
Card type
Device number must match the physical address
switch on the card.
(MSDL only) Port number in the range 0–3
AML port designation
Modular Option EC Installation Quick Reference Guide
Configuring the Meridian 1 for Meridian Mail
Configuring the AML link
November 1999