Cabling - Nortel HomeOffice II User Manual

June 1999

Cabling

Introduction
This section describes cables that are unique to the Meridian HomeOffice II
system.
HomeOffice II Multi-I/O cable
The HLC provides the following ports:
an MMI port to enable you to configure the HLC according to the
individual circumstances of the company and each user
an SDI port for you to communicate with the switch.
The Meridian HomeOffice II Line Card Multi-I/O cable brings these
connections outside the IPE shelf or Option 11 cabinet (see page 45).
The following table shows the function of each plug of the HomeOffice II Line
Card Multi-I/O cable and the type of connector:
Plug
P1
P2
P3
Line Card Configuration Guide
Function
IPE connection
MMI
SDI
Description
Connection
25-pair Telco
DB-25 male
DB-25 female
13