Nortel Meridian Mail Installation Quick Reference Manual page 87

Installing the Meridian Mail to Meridian 1 interface
Install the network loop hardware
Indirect cabling
See the illustration on the previous page.
Standard 1.0
Step Action
1 If the NT5K1110 or NT6P0122 cables are not already installed
from the I/O panel of the Meridian Mail module to the Meridian
Mail backplane, install them.
2 Install the other cables as shown in "Network loop cabling" on
page 7-6.
3 Set the enable/disable switch on the faceplate of the network
card to Enb.
The LEDs remain on.
Modular Option EC Installation Quick Reference Guide
7-7
November 1999