Configuring the mass storage units
Tape drives
Tape drives
Introduction
Tape drives supported for Release 13.0 of the Modular Option EC system are listed in the
following table.
Supported tape drives
Verifying tape drive jumpers and terminators
Standard 1.0
Tape Drive
Tandberg TDC
4220
Archive Viper 2150
Step Action
1
Ensure that the SCSI ID on the tape drive is set to 1.
2
Verify the other jumpers as shown in the following illustrations.
Refer to either the Archive or the Tandberg tape drive
illustrations, as appropriate for your system.
3
Ensure that the tape drive terminator resistor packs are all
removed.
Modular Option EC Installation Quick Reference Guide
PEC Code
NT6P05BA (A0630014)
NT6P05AA (A0391974)
4-7
Storage Capacity
2.5 Gbytes
250 Mbytes
November 1999