Nortel Meridian Mail Installation Quick Reference Manual page 98

8-4
ICL recommended data port use
Port
Node 1 Enhanced
MMP40 or MMP40
port 1
Node 1 Enhanced
MMP40 or MMP40
port 2
Node 1 Utility Card
port 1
Node 1 Utility Card
port 2
Node 1 Utility Card
port 3
Node 1 Utility Card
port 4
Node 2 Enhanced
MMP40 or MMP40
port 1
Node 2 Enhanced
MMP40 or MMP40
port 2
Installing the A/B switchbox
The A/B switchbox is required for remote administration and maintenance by
Nortel Networks personnel.
Standard 1.0
Allowable uses
System Console or AdminPlus
AML
Remote Access
GAC, MAT, Network Modem, Printer, ICL
GAC, MAT, Network Modem, Printer, ICL,
PMSI Link
GAC, MAT, Network Modem, Printer, ICL,
PMSI Link
GAC, MAT, Printer
GAC, MAT, Printer
Step Action
1 Place the A/B switchbox in a suitable location close to Meridian
Mail.
2 Set the switch on the front of the A/B switchbox to the A
position. Label this switch position and the A connector Local.
Label the other position and the B connector Remote.
3 Connect the cable from the A/B box to the SLT6–PB connector
on the 5–port fanout cable on the Meridian Mail right I/O panel.
See " A/B switchbox (rear view)" on page 8-5.
Modular Option EC Installation Quick Reference Guide
Installing peripheral devices and cabling
Overview of installation
November 1999