Nortel Meridian Mail Installation Quick Reference Manual page 183

Starting up and configuring Meridian Mail
Starting up Meridian Mail
DSP Port Status screen
DSP Port Status
Ports
Node 1 2 3 4 5 6 7 8 9 10 11 12
1 . . . . . . . . . .
a = Active/In Use
F = Faulty
L = Loading
Select a softkey >
Exit
Standard 1.0
DSP Port Status
.
. = Idle
P = Pending
C = CourtesyDown
19 While watching this screen, dial the voice messaging DN from a
phone connected to the switch.
20 Note which channels become active.
21 Ensure there is no noise on the line.
22 Release. Repeat steps 21 to 23 until all ports have been tested.
23 If all appears to be OK, press <Exit> to return to the Logon
screen.
24 Replace the faceplates that cover the disk/tape drive areas.
25 Install the I/O covers and the front and rear doors of the
modules.
Modular Option EC Installation Quick Reference Guide
.
O = Out of Service
U = Unequipped
? = Unknown
R = NoResource
November 1999
10-9
g101075