Nortel Meridian Mail Installation Quick Reference Manual page 103

Installing peripheral devices and cabling
Overview of installation
Configuring the LA75 Plus Companion printer
See "Front control panel on LA75 Plus Companion printer" below.
Front control panel on LA75 Plus Companion printer
Ready
RDY
Serial port
Set-up
LA75 printer settings
Feature
number Name
Generic 1 Protocol at power–up
Generic 2 Form length
Generic 3 Vertical pitch
Generic 4 Automatic advance
Generic 5 Print quality control
Generic 6 Port selection
Generic 7 Baud rate
Standard 1.0
Step Action
1 Ensure the printer is turned off.
2 Press and hold the Set–up button on the front control panel of
the printer and, at the same time , power on the printer. Release
the Set–up button one to two seconds after powering on. See
the illustration below for the layout of the front panel.
The printer prints out a list of the default settings, goes back to
the beginning of the list (that is, to Generic 1), reprints the first
setting, and stops.
Quiet/
Fault Quiet Quality
Modular Option EC Installation Quick Reference Guide
Protocol DEC
LQ
Draft
Required
value Meaning
3 Port dependent
9 27.94cm (11 inches) (A)
4 6 lines per 2.54cm (inch)
1 Selected
1 Software control
1 Serial port
7 9600
8-9
LF FF
G100076
November 1999