MX150 Universal Routing Platform Hardware Guide
MX150 Cooling System
Related
Documentation
MX150 Power System
Power Supply in MX150
See Also
AC Power Supply Specifications for an MX150
24
The MX150 has front-to-back airflow. The air intake to cool the chassis is located at the
front of the chassis. Air is pulled into the chassis and pushed toward the fans, which are
built-in. Hot air exhausts from the rear of the chassis. See
Figure 8: Front-to-Back Airflow Through the MX150 Chassis
Prevention of Electrostatic Discharge Damage on page 104
Power Supply in MX150 on page 24
AC Power Supply Specifications for an MX150 on page 24
AC Power Cord Specifications for an MX150 on page 25
The MX150 routers use a fixed, internal AC power supply. The power supply distributes
different output voltages to the device components according to their voltage
requirements. The power supply is fixed in the chassis and is not field-replaceable.
The power supply has a single AC appliance inlet that requires a dedicated AC power
feed. The AC power cord inlet is on the rear panel of the device.
Connecting AC Power to an MX150 on page 55
Table 9 on page 25
describes the AC power specifications for an MX150.
Figure 8 on page
24.
Copyright © 2019, Juniper Networks, Inc.