648 Port InfiniBand FDR Switch Platform Hardware Installation Guide
You will most likely need extra room for cable bending on the connector side of the chas-
sis and should plan to keep the spine side as close to the rack door as possible, thus hav-
ing more room for the cables.
Step 7.
Place the chassis in front of the rack and as close as possible to the rack.
Mellanox Technologies
Figure 17: Placement of Chassis in Rack
Doors
Shelf
Chassis
Insufficient room for recommended
bending radius
Doors
Figure 18: Fork Lift
Hinged extension
Cable with
recommended
bending radius
Connector side
Spine side
Container floor
Rev 1.4
25