Figure 9: Shelf Brackets - Mellanox Technologies MSX6536-10R Hardware Installation Manual

648 Port InfiniBand FDR Switch Platform Hardware Installation Guide
Step 6. Insert five nuts into the rack for each of the four shelf brackets (the 2 brackets
that are adjustable and the 2 that are fixed). Make sure that the caged nuts are
all at the same height on the vertical supports. Do not use the top hole in the
bracket.
Step 7. Put the Shelf into the rack and twist the shelf into place. Make sure the spine
side of the shelf is closest to the rack doors. See Figure 9 to identify the spine
side of the shelf.
Step 8. Install and tighten the 20 M6 bolts into the caged nuts.
The spine side of
the shelf has two
slots for the
extension
Adjustable shelf
brackets
Step 9. Tighten the 16 hex head bolts on the adjustable brackets.
Mellanox Technologies

Figure 9: Shelf Brackets

Rev 1.4
19