648 Port InfiniBand FDR Switch Platform Hardware Installation Guide
Step 12.
Slide the chassis onto the shelf and determine the location of the upper brack-
ets, on the vertical supports on the connector side of the chassis.
Step 13.
Confirm that the caged nuts for the faceplate are in the correct location.
Mellanox Technologies
Figure 20: Face Plate Mounting Bolt Locations
Do not move the forklift away from the rack just yet.
Holes in the faceplate for mount-
ing on the rack.
The holes are separated by 4U
units
Rev 1.4
27