Figure 2-14
Step 1. Press the
Step 2. Press the
Step 3. Press the
Searching for Peak
to Peak points
Making Basic Measurements
Displaying the Measurement Results
Typical Trace showing Maximum Point Found
To search for the minimum point, select the
menu key.
Search
Search Type
menu key.
Find
If you want to continuously find the maximum point on the trace, select
.
Continuous(On)
You need to have activated a marker state to Band Pair to perform a
Peak to Peak search.
48
menu key to select the
:
Search Type(Min)
.
Search Type(Min)
Chapter 2