Loading A File; Renaming A File - Agilent Technologies NFA Series Quick Reference Manual

NOTE
Step 1. To access the Load menu press
Step 2. Select the type of file you want to load (ENR tables, states, limits or
Step 3. Select the drive where your file is located by pressing
Step 4. Select the file you want to load into the Noise Figure Analyzer by
Step 5. Press
Step 1. Press
Step 2. Select the type of file you want to rename (ENR tables, states, traces,
Step 3. Select the drive where you file is located, by pressing the
Step 4. Select the file you want to rename by moving the cursor with the RPG or
Step 5. Press
Getting Started
Performing Common File Operations

Loading a File

You can load files (ENR tables, states, limits or frequency lists) from a
floppy disk (A:\), or the internal drive (C:\).
Not all the file types you save can be loaded back into the Noise Figure
Analyzer. For example, screen files and trace files. The trace file is in a
CSV (comma separated value) format, designed for use with a PC.
frequency lists).
to highlight [-C-] or [-A-], then press
changing the highlighted file with the up or down arrow keys to
highlight the file name.
to load the specified file.
Enter

Renaming a File

You can rename a file in the [-C-] or [-A-] drive as follows:
,
File File Manager
limits, frequency lists or screens).
For example, if you are renaming a ENR table file, press
. To change drive, use the arrow keys to highlight [-C-] or [-A-],
Select
then press .
Select
arrow keys to highlight the file name.
→to enter the Alpha Editor menu. File names are limited to
Tab
eight (8) characters.
16
, .
File Load
Select
, to access the Rename menu items.
Rename
→ . Use the RPG
Tab
.
.
ENR
→key, press
Tab
Chapter 1