Agilent Technologies NFA Series Quick Reference Manual page 52

NOTE
Step 1. Press the
Step 2. Press the
Making Basic Measurements
Displaying the Measurement Results
Setting the Reference Level
The reference level is only visible when the
Display Ref
in the active graph. Set the
level on. The default setting is
menu key. Change the reference level value using the
Ref Level
RPG or the numeric keys. Values that are entered using the numeric
keys, are terminated using the
42
menu key if you want the reference level displayed
Display Ref(On)
Display Ref(Off)
key.
Enter
is enabled.
Display Ref(On)
which switches the reference
.
Chapter 2