Agilent Technologies NFA Series Quick Reference Manual page 55

To use Delta
Markers
Step 1. Press the
Step 2. Press the
Step 3. Press the
To use Band Pair
Markers
Step 1. Press the
Step 2. Press the
Step 3. Press the
Step 4. Use the RPG to move the active marker from the reference. The
Changing the Marker States
The menu key places a reference marker at the current
State(Delta)
position of the active marker. This enables you to measure the difference
between the reference marker and an active marker position on the
trace.
To activate a Delta marker:
key.
Marker
menu key to select the marker of interest.
Marker
menu key and press the
State
Use the RPG to move the Delta marker from the reference. The
annotation displays the difference.
The
State(Band Pair)
to move either the normal marker or the reference marker. The position
of the reference marker remains fixed until
is pressed and the active marker becomes the fixed marker. This can be
altered by pressing the
marker as the active marker. The active marker has its frequency and
noise parameter values annotated in the display window relative to the
reference marker.
To activate the Band Pair Markers:
key.
Marker
menu key to select the marker of interest.
Marker
menu key and press the
State
highlight it.
annotation displays the difference between the reference and the normal
markers position.
Chapter 2
Displaying the Measurement Results
Delta
menu key places two markers allowing you to choose
menu key to enable the reference
Band Pair(Ref)
State(Band Pair)
Making Basic Measurements
menu key to highlight it.
menu key
Band Pair(Normal)
menu key to
45