Setting Loss Compensation; Configuring Loss Compensation - Agilent Technologies NFA Series Quick Reference Manual

Step 1. Press the
Figure 3-2
Step 2. When configuring loss compensation before the DUT, use the
Step 3. Set the loss compensation value before the DUT, use the
Step 4. Set the temperature value before the DUT, use the

Setting Loss Compensation

You can configure the Noise Figure Analyzer to compensate for losses
due to cabling, connectors and temperature effects that occur in the
measurement setup between the Noise Source and the DUT, and
between the DUT and the Noise Figure Analyzer input.

Configuring Loss Compensation

Loss Comp
Loss Compensation Form
navigate to the
Before DUT
menu key to highlight it.
navigate to the
Before DUT Value
the loss occurring before the DUT.
Chapter 3
key to access the Loss Compensation form.
field and set it to ON by selecting the
field and input the required value for
Advanced Features
Setting Loss Compensation
Tab
key to
Tab
key to navigate to
Tab
key to
On
55