Agilent Technologies NFA Series Quick Reference Manual page 41

Figure 2-5
Step 3. Press the
Step 4. Enter the frequency value you want using the numeric keys. Terminate
Step 5. Press the
Step 6. Repeat step 5 until your list is complete.
Step 7. Save the Frequency List to the Noise Figure Analyzer internal memory
NOTE
An Empty Frequency List
More 1 of 2
it using the unit menu keys which are presented to you.
key or
Tab —>
Enter the next frequency value of the frequency list by using the numeric
key pad and the unit termination keys.
or to a diskette if required using the
You need to save the frequency list or it is lost if you power down the
instrument, as the data is temporarily stored in volatile memory. This is
overcome if you use
Frequency List.
Chapter 2
Setting the Measurement Frequencies
, menu keys.
Clear Table
menu key.
Row Down
File
or
Power On(Last) Preset(User)
Making Basic Measurements
key.
which contains a
31