Saving A File - Agilent Technologies NFA Series Quick Reference Manual

Step 1. To access the Save menu press
Step 2. Select the type of file you want to save.
Step 3. Select the limit tables file you wish to save (
Step 4. Enter a filename using the Alpha Editor menu keys. See"Using the
Step 5. Select the drive you wish to save to by pressing
NOTE
Step 6. Press

Saving a File

You can save files (ENR tables, states, traces, limits, frequency lists, or
screens) to a floppy disk (A:\), or the internal drive (C:\) of the Noise
Figure Analyzer.
For example, if you have a limit line table data present and want to save
it, press .
Limits
For example, to save file 2, press
Alpha Editor" on page HIDDEN. File names are limited to eight (8)
characters.
directory and file list, press
If the correct drive is not listed in the Path: field, highlight ".." at the
top of the directory list. This enables you to move up a directory. Press
. To highlight the desired drive,[-A-] or [-C-]) use the arrow keys
Select
or the RPG, press
Select
, to save the file to the drive.
Enter
Chapter 1
Performing Common File Operations
, .
File Save
1
.
2
.
Select
when highlighted.
Getting Started
, , or ).
2 3 4
Tab →
, to move to
15