Step 1. Press the
Figure 2-3
Step 2. Optional Step
Making Basic Measurements
Entering ENR Data
Entering ENR Table Data
You can enter ENR data in the form of an ENR table in four ways:
• manually by inputting the required frequencies and corresponding
ENR values
• loading the ENR data from a diskette, on which the data has been
previously stored
• loading the ENR data from the internal memory, where the data has
been previously stored
• loading of the ENR data using the GPIB Programmer, see the
Programmer's Guide for more details
To enter ENR table data manually
key, and the
ENR
An Empty ENR Table
Press the
Serial Number
number using the numeric keys and the Alpha Editor.
24
menu key.
ENR Table
menu key and enter the noise source serial
Chapter 2