Performing System Operations
Configuring the Internal Alignment
Configuring the Internal Alignment
Data from the internal alignment routine is necessary for accurate NFA
operation and when enabled, the internal alignment routine runs
continuously to ensure that the NFA is using current alignment data
which improves the NFA's accuracy.
Turning Alignment Off and On
Step 1. Press the
System
Step 2. Press the
Alignment
Step 3. Press the
Alignment
Alignment(Off)
The default is alignment on.
Changing Alignment Mode
Step 1. Press the
System
Step 2. Press the
Alignment
Step 3. Press the
Alignment Mode
Mode(Point)
The default is alignment mode is sweep.
66
key.
menu key to access the Alignment menu.
menu key to turn alignment
as required.
key.
menu key to access the Alignment menu.
menu key to turn alignment mode
or
Alignment(Sweep)
Alignment(On)
as required.
or
Alignment
Chapter 4