Agilent Technologies NFA Series Quick Reference Manual page 54

To turn an active
marker off
To change the
active marker
Figure 2-11
To Switch all the
Markers Off
Making Basic Measurements
Displaying the Measurement Results
To turn an active marker off press the
menu key to highlight it. This also removes the marker annotation from
the display and uncouples any marker functions.
The default active marker setting is
marker, press the
Marker
to
Marker(1⇑ ) Marker(2⇑ )
from to
Marker(2⇑ ) Marker(3⇓)
the . See Figure 2-11.
Marker(1⇑ )
Four Markers in Normal State
To switch all the markers off press
markers and associated annotation.
44
menu key and press the
State
Marker(1⇑ )
menu key. This moves the active marker from
. Press it again and it moves the active marker
. This process is repeated until it returns to
Markers(All Off)
. To change the active
. This turns off all the
Chapter 2
Off