Step 1. Turn the NFA on by pressing the
Step 2. Press
Step 3. Press the green
NOTE
Performing System Operations
Presetting the Noise Figure Analyzer
Presetting the Noise Figure Analyzer
To preset the analyzer using its factory defaults:
process to complete.
,
System
Power On/Preset
Preset
Turning on the analyzer performs an instrument preset. Turning on the
analyzer also fetches alignment data; clears both the input and output
buffers; turns off limit line testing; and sets the status byte to 0. The last
state of the analyzer before it was turned off is recalled when
is pressed (under the
Power On(Last)
68
key and wait for the power-up
On
,
Preset (Factory)
key.
System
.
key).
Chapter 4