Ipmi; Amc Bays; Rtm Connector; Power Supply Mezzanine - Kontron AT8402 User Manual

AT8402
1.1.1.6

IPMI

• PICMG 3.0 / IPMI 1.5 compliant
• Additional Firmware Update Manager (FUM) for field upgrades, rollbacks and watchdog
functions
• Renesas R8C/13 µController
• Serial EEPROM for FRU storage (serial ID)
1.1.1.7

AMC Bays

• Up to four PICMG AMC.0 Revision 2.0 compatible mid-size AMC bays (see section 1.1.5)
• B+ connectors
• AMC.1 Type 4E2S (x4 PCI Express) on AMC B1 and B3
• AMC.1 Type 8E2S (x8 PCI Express) support on AMC B2 and B4
• Telecom clocks and/or PCI Express clock support
1.1.1.8

RTM Connector

• Support for 8 RTM lanes from each AMC
• FE and RS232 (RJ45) management ports
• 4x SAS / SATA connections
• 2x GbE
• 12V and 3V3 sus Supply Voltage connections
• I²C support
• JTAG and production I/O support
1.1.1.9

Power Supply Mezzanine

• Isolated 48V to 12V Standard Quarterbrick intermediate bus converter
• Hot swap support
• Hold Over Circuit using high voltage capacitor and charge pump
• Isolated management power supply
• 48V power Supply 'ORing' circuit
• Supplies point of load regulators for secondary supply voltages (derived from 12V inter-
mediate rail) on base board
Page 1 - 4
Introduction
AT8402 User Guide