Pdr8000 Programming Basics; Installing And Uninstalling The Futurecom Repeater Configurator (Frc) - Futurecom PDR8000 Programming Manual

I
NSTALLING AND
Operating
Systems
Processor
Peripherals
(FRC)
If Futurecom Repeater Configurator (FRC) or Tweaker is previously installed on the PC,
uninstall it before you install the new Futurecom Repeater Configurator (FRC).
To uninstall Tweaker – Control Panel → Add and Remove Programs → PDR_Tweaker →
Remove.
To uninstall the Futurecom Repeater Configurator (FRC) – Control Panel → Add and Remove
Programs, → PDR8000 Futurecom Repeater Configurator (FRC) → Remove.
To install the Futurecom Repeater Configurator (FRC), download the application from the
Futurecom website into the desired location on your PC.
For optimum view of the Futurecom Repeater Configurator (FRC) menu windows on the PC,
following are the recommended settings for Microsoft Windows.
•
The Windows display resolution set to 1920 x 1080 and text size no greater than 125%.
•
The Futurecom Repeater Configurator (FRC) font size should not be greater than 9.
•
It is recommended to use 'Tahoma' Regular 8 Font. Please see the screen below.
2022-08-25

PDR8000 Programming Basics

U
NINSTALLING THE
Microsoft Windows 10 or Windows 11
1GHz (or higher) grade processor
USB Port
®
PDR8000 Portable Digital Repeater Programming Guide
F R
UTURECOM EPEATER
Document 8K088X04 R5.01
C
ONFIGURATOR
Page 17 of 86