Pdr8000 Programming Basics; Installing And Uninstalling The Futurecom Repeater Configurator (Frc) - Futurecom PDR8000 Programming Manual

PDR8000 Programming
I
NSTALLING AND
Operating Systems
Processor
Peripherals
If Futurecom Repeater Configurator (FRC) or Tweaker is previously installed on the PC, uninstall it before
you install the new Futurecom Repeater Configurator (FRC).
To uninstall the Tweaker – go to the Control Panel, Add and Remove Programs, find PDR_Tweaker and
select the Remove option.
To uninstall the Futurecom Repeater Configurator (FRC) – go to the Control Panel, Add and Remove
Programs, find the PDR8000 Futurecom Repeater Configurator (FRC) and select the Remove option.
To install the Futurecom Repeater Configurator (FRC), download the application from the Futurecom
website into the desired location on your PC.
For optimum view of the Futurecom Repeater Configurator (FRC) menu windows on the PC, following
are the recommended settings for Windows 10.
•
The Windows display resolution set to 1920 x 1080 and text size no greater than 125%.
•
The Futurecom Repeater Configurator (FRC) font size should not be greater than 9.
•
It is recommended to use 'Tahoma' Regular 8 Font. Please see the screen below.
2021-11-0
Basics
Uninstalling the Futurecom Repeater Configurator (FRC)
Windows 10
1GHz or higher grade processor
USB Port
PDR8000® Portable Digital Repeater Programming Guide
8K088X04 R5.00
Page 14 of 98