Futurecom PDR8000 Programming Manual page 59

Field Name Options / Units
Channel 1-64 Channels
< Prev.CH 1-64
< Next CH 1-64
PL/DPL Code Maximum 10
Table Name alphanumeric
characters
< Prev.Tbl 1-64
< Next Tbl 1-64
Channels Using Comma separated
This Table: list of numbers, 1-64
Multi PL/DPL
Enabled
Disabled
2022-08-25
®
PDR8000 Portable Digital Repeater Programming Guide
Description
Identifies the name of the channel for the
current Analog Code Table
Decrements Channel by 1
Goes to the next channel
Name that identifies the current Analog
Code Table.
Decrements Analog Code Table by 1
Goes to the next Analog Code Table
List of PDR8000 channel number(s) that use
current Analog Code Table.
Multi PL/DPL - Multi-coded squelch allows
you to predefine a set of accepted Rx
PL/DPL and associated Tx PL/DPL being
used by repeat calls.
Receiver operation allows PDR8000 to
accept incoming RF signal containing a
specific PL/DPL value as defined by the Rx
PL/DPL field in the first row of Multi-PL/DPL
table. Repeater calls are transmitted using
the Tx PL/DPL field value as defined in first
row of Multi-PL/DPL table.
Receiver operation allows PDR8000 to
accept incoming RF signal containing a
specific PL/DPL value as defined by the Rx
PL/DPL field in all the 14 rows if 'Enabled' in
the Multi-PL/DPL table. Repeater calls are
transmitted using the Tx PL/DPL field value
as defined in the Multi-PL/DPL table.
Document 8K088X04 R5.01
Notes
Changes the
Analog Code
Table
accordingly.
Changes the
Analog Code
Table
accordingly.
This field is read
only.
Page 59 of 86