Futurecom PDR8000 Programming Manual page 47

Field Name
Ch. # 1-64
Enabled No
Yes
Channel Name Maximum 16
alphanumeric
characters.
Channel Type Analog
Digital
Mixed
Channel Mode F.Duplex
Simplex
H.Duplex
2022-08-25
Options /
Units
Identifies the current channel as
one of 64 possible channels.
Used to enable/disable channels
relevant to the location the
PDR8000 is deployed in.
Name that identifies the channel.
Determines the PDR8000
Channel type.
Determines the PDR8000 mode of
operation for the current channel,
Full Duplex, Half Duplex.or
Simplex
®
PDR8000 Portable Digital Repeater Programming Guide
Description
Document 8K088X04 R5.01
Notes
This field is read only.
This field is also updated based
on Repeater Operation (as
configured in the RF Configuration
window).
Ch1 must be enabled.
Underscore may not be used in
the Channel name as it will be
displayed as space on the
PDR8000 display.
Analog & Mixed Channels work
with PDR8000 in Repeater mode
only.
- Repeater Mode: only Full Duplex
Channels are enabled
- Base Station Mode: Full Duplex,
Half Duplex or Simplex channels
are enabled.
Page 47 of 86