Futurecom PDR8000 Programming Manual page 33

Field Name
Rackmount Booster
Power up on Last
Deployment
Start Up Deployment
Start on Last Active Channel
of Start Up Deployment
Startup Channel of Start Up
Deployment
Time Zone
Daylight Saving Time Active
2022-08-25
PDR8000
Options / Units
Enabled/Disabled Purchased Option
(Rackmount PDR8000
only)
Enabled/Disabled When enabled, the
PDR8000 powers up on the
last active Deployment
Profile. When Disabled the
PDR8000 powers up on the
deployment profile
configured in "Start Up
Deployment" (below).
Selects the Start Up
1-10
Deployment.
Enabled/Disabled If enabled, the PDR8000
will switch to the last active
channel upon starting up
1-X Channel number of the
Start Up Deployment on
which the PDR8000 shall
start up on. Max channel
number is the highest
channel configured in the
Start Up Deployment.
Select time Zone from the
drop-down menu.
Enables/Disables Daylight
Yes
saving time.
No
Document 8K088X04 R5.01
®
Portable Digital Repeater Programming Guide
Description
Read only
When enabled, then the
channel within the
deployment profile that is
active upon power up is
determined by
configuration within that
Deployment Profile's
"General Configuration"
window
Not applicable if Power
up on Last Deployment
is enabled.
Not applicable if Power
up on Last Deployment
is enabled. In that case,
the channel activated at
power up is determined
by configuration within
that Deployment Profile's
"General Configuration"
window.
Not applicable if Start on
Last Active Channel of
Start Up Deployment is
Enabled, or if Power up
on Last Deployment is
enabled.
If Power up on Last
Deployment is enabled,
then the channel
activated at power up is
determined by
configuration within that
Deployment Profile's
"General Configuration"
window.
Follows the settings in
'Set Device Date and
Time'
Follows the settings in
'Set Device Date and
Time'
Notes
Page 33 of 86