Pdr8000 Programming Guidelines; Programming Steps Overview; Pdr8000 Programming; Pdr8000 Configuration - Futurecom PDR8000 Programming Manual

PDR8000 Programming Guidelines

P S
ROGRAMMING TEPS
The PDR8000 operation depends on the following:
1. PDR8000 firmware and programming settings
2. PSU type, firmware and programmed personality
3. System infrastructure
PDR8000 P
ROGRAMMING
The following paragraphs provide detailed PDR8000 programming information.
IMPORTANT!
Do not change PDR8000 settings unless fully familiar with the meaning of a specific option.
The Futurecom Repeater Configurator (FRC) program reports any obvious errors and does not
allow invalid data to be saved to the PDR8000, however, not all inconsistencies can be reported
by the Futurecom Repeater Configurator (FRC). Successful PDR8000 programming requires
thorough understanding of the PDR8000 and PSU programming as well as the specific User /
System requirements. Only when all templates (PDR8000 and PSU) are matched, the
PDR8000 will operate properly.
PDR8000 C
ONFIGURATION
S D D
ET EVICE ATE AND
To set the PDR8000 date and time connect the PDR8000 to the PC. Click on the PDR menu of
the Futurecom Repeater Configurator (FRC). From the dropdown list select 'Set Device Date
and Time'.
2022-08-25
O
VERVIEW
T
IME
®
PDR8000 Portable Digital Repeater Programming Guide
Document 8K088X04 R5.01
Page 25 of 86