Reading From The Pdr8000 (Uploading Data); Writing To The Pdr8000 (Downloading Data) - Futurecom PDR8000 Programming Manual

Document 8K088X04 R5.01
®
PDR8000 Portable Digital Repeater Programming Guide
R PDR8000 (U D )
EADING FROM THE PLOADING ATA
To read a PDR8000 unit:
1. Establish On-Line communication with the PDR8000.
2. Select PDR8000 → Load Data from PDR8000 Repeater OR Press F2.
3. The personality data of the currently connected PDR8000 unit will be loaded into the
Futurecom Repeater Configurator (FRC) memory for reviewing and / or editing.
W PDR8000 (D D )
RITING TO THE OWNLOADING ATA
Applying dpd File ('Cloning'
)
Select File → DPD Files (Templates) → Apply DPD to The Repeater. Specify the desired
.dpd file name and location when prompted.
If the user has an old dpd file created with R1.0 or R2.0 or R3.0, the Futurecom Repeater
Configurator (FRC) upgrades this file to the current dpd format prior to applying it to the
PDR8000.
The file can be selected by pressing Ctrl+F6, or from the menu:
File → DPD Files (Templates) → Apply DPD File
Upon loading an old dpd file, this dialogue window will appear:
If the user selects "Yes", this message will appear:
2022-08-25 Page 21 of 86