Futurecom PDR8000 Programming Manual page 54

Field Name Options / Units
Tx NAC Selected
by Last Received
Rx NAC
Enabled
Disabled
Tx NAC selected 1-30 min
by Last Rx NAC
5 min
Duration
2022-08-25
®
PDR8000 Portable Digital Repeater Programming Guide
Description
Specifies how Tx NAC is selected for
transmitting the infrastructure audios.
Enabled: When the Tx NAC Selected by
Last Rx NAC Duration has not expired, the
Tx NAC is selected according to following
rules:
For Multi-NAC operation, Tx NAC is set to
the programmed Tx NAC from the row in the
Multi-NAC table where Rx NAC is equal to
the last received Rx NAC.
For $F7E and $F7F, Tx NAC is set to the
last received Rx NAC.
Disabled: or Tx NAC Selected by Last Rx
NAC Duration has expired, the Tx NAC is
set to the programmed Tx NAC from the first
row in the Multi-NAC table.
Defines how long the last Rx NAC is used
for transmissions after the last received call.
Each received call restarts the timer.
Document 8K088X04 R5.01
Notes
A DFSI-
connected
console may
utilize this
functionality by
specifying Tx
NAC of $F7E, or
may override
this behavior by
providing a
specific Tx NAC
as part of the
transmission
information.
This field is
accessible only
when Tx NAC
Selected By
Last Rx NAC is
Enabled.
A DFSI-
connected
console may
utilize this
functionality by
specifying Tx
NAC of $F7E or
may override
this behavior by
providing a
specific Tx NAC
as part of the
transmission
information.
Page 54 of 86